IEEE Commands Power Supply NGMO
4.00 / 07-2004 5-3
Com-
mand
Parameter Par. value Description Def. SCPI
*BTRg Sends a
“SENSE:PULSE:S
TART ON" and a
soft trigger
command to
channel B
*TST? Performs a
checksum test on
ROM and returns
0 for test OK and
1 for test failed
*WAI Waits until all
previous
commands are
executed
:DISPlay :ENABle <CHAR_VAL> Enables or
disables the LC
Display
ON
9
OFF Turns display off
(fast data mode)
ON Turns display on
MIN Turns display off
* DEFault Turns display on
MAX Turns display on
:DISPlay :ENABle? <CHAR_VAL> Queries status of
display
Results:
OFF
ON
MIN OFF
DEFault ON
MAX ON
:DISPlay :CHANnel <CHAR_VAL> Changes the
active display
channel
A Channel A A
B Channel B
DVMA DVM A
DVMB DVM B
MIN Channel A
DEFault Channel A
MAX DVM B
:DISPlay :CHAN-
nel?
Queries the active
display channel
setting
Results:
A
B
DVMA
DVMB
MIN A
DEFault A
To Next Page
Loading...
