Rohde & Schwarz NGMO1 - Page 6

Power Supply NGMO Contents
2 Version 4.00 / 07-2004
4.5 Measurements 4-23
4.5.1 Reading back Voltage (V), Current (I), DVM 4-23
4.5.2 Dynamic Measurements 4-23
4.6 Status Structure 4-28
4.6.1 Status Byte and SRQ 4-28
4.6.2 Queues 4-28
5 IEEE Commands 5-1
5-1 IEEE-488.2 common commands and queries 5-1
5-2 FORMAT command summary 5-5
5-3 OUTPut command summary 5-6
5-4 SENSE command summary 5-9
5-5 SOURCE command summary 5-17
5-6 STATUS command summary 5-20
5-7 CONFIG command summary 5-22
5-8 SYSTEM command summary 5-23
5-9 Signal-oriented measurement-command summary 5-28
5-10 Remote calibration command summary 5-30
6 Ordering Information 6-1