Rohde & Schwarz R&S SFE100 - Page 56

Sample Application
R&S
®
SFE100
37Getting Started 2112.4122.62 ─ 13
2. Press the ENTER key.
The tree is expanded and the "FREQUENCY" submenu is displayed.
3. In the tree, select the "FREQUENCY" submenu.
4. Press the ENTER key.
The focus is set on the work view.
5.
Set a frequency of 330 MHz.
a) Select the "FREQUENCY" field.
b) Enter 330.
c) Press the ENTER key.
The entered frequency is displayed in the info area.
Setting the output level
1. In the tree, select the "LEVEL" menu.
2. Press the ENTER key.
The tree is expanded and the "LEVEL" submenu is displayed.
深圳德标仪器 135-1095-0799