Sample Application
R&S
®
SFE100
38Getting Started 2112.4122.62 ─ 13
3. In the tree, select the "LEVEL" submenu.
4. Press the ENTER key.
The focus is set on the work view.
5.
Set a level of -20 dBm.
a) Select the "LEVEL" field.
b) Enter -20.
c) Press the ENTER key.
d) If you want to enter the level in a different unit, change the unit in the "LEVEL"
menu, under "SETTINGS" / "LEVEL UNIT" first (see user manual or help sys-
tem).
The entered level is displayed in the info area.
Setting the modulation parameters and selecting the transmission standard
1. In the tree, select the "MODULATION" menu.
2. Press the ENTER key.
The tree is expanded and the "MODULATION" submenu is displayed.
To Next Page
Loading...
