Trying Out the Instrument
R&S
®
RTE
55Getting Started 1326.1026.02 ─ 08
Now the result box also shows the result of the time measurements.
9.
Tap "Set as QuickMeas".
The current configuration is set as default quick measurement and can be
repeated until you save another configuration.
10. Close the dialog box.
11. To save space in the display, minimize the result box:
The most important results are displayed and updated in the result icon.
Do not close the result icon, as you need the results for the Search example
(see Chapter 5.9, "Performing a Search", on page
62).
Showing Basic Measurement Results
To Next Page
Loading...
