Trying Out the Instrument
R&S
®
RTE
60Getting Started 1326.1026.02 ─ 08
7. To remove the FFT results, tap the "Delete" icon and then the spectrum wave-
form.
8. Close the "Measurement" results.
5.8 Performing Mathematical Calculations
In addition to the measured waveforms, you can display calculated data to com-
pare the current measurement result with.
For example, you can rescale the waveform and display it in the same diagram as
the original waveform.
1.
Press [AUTOSET].
2. Press the [MATH] key.
3. In the "Setup" tab, select the "Basic" subtab.
Performing Mathematical Calculations
To Next Page
Loading...
