Rohde & Schwarz SMAB-K24 - General Settings; VOR Configuration and Settings

Avionic Standards
R&S
®
SMA100B
116User Manual 1178.3834.02 ─ 05
Related Settings
For ADF settings at the R&S SMA100B, see Chapter 5.5, "ADF Configuration and Set-
tings", on page 148.
5.3 VOR Configuration and Settings
Option: R&S SMAB-K25
Access:
► Select "Modulation > Avionic Standards > VOR".
The remote commands required to define VOR settings are described in Chap-
ter 13.16.2.5, "SOURce:VOR Subsystem", on page 574.
Settings
● General Settings....................................................................................................116
● Signal Settings...................................................................................................... 119
● Position Settings................................................................................................... 121
● COM/ID Settings................................................................................................... 122
5.3.1 General Settings
Access:
► Select "VOR > General"
This dialog comprises general settings of the VOR standard, the default and the
"Save/Recall" settings.
VOR Configuration and Settings