Rohde & Schwarz SMAB-K24 - Accessing the R&S SMA100 B File System Via SMB (Samba)

File and Data Management
R&S
®
SMA100B
308User Manual 1178.3834.02 ─ 05
Open the /var/user/ directory.
The dialog displays the /var/user/test ftp directory.
10.9.3 Accessing the R&S SMA100B File System Via SMB (Samba)
The SMB (Samba) protocol is an alternative way to access the file system of the instru-
ment from a remote PC. This protocol works if both the instrument and the PC are con-
nected to a LAN.
For information on how to set up a LAN connection, refer to:
●
Chapter 2.1.3, "Setting Up a Network (LAN) Connection", on page 28
●
Chapter 12, "Network Operation and Remote Control", on page 346
To access the file system via SMB
We assume that the instrument and the remote PC are connected to a LAN.
1. Enable file transfer via ftp
2. Enable write permission on the file system
3. On the remote PC, start the Windows Explorer.
4. In the address field, enter //<"IP Address" of the Instrument>, e.g. ftp://
10.124.0.166.
How to Transfer Files from and to the Instrument