Remote Control Commands
R&S
®
SMA100B
590User Manual 1178.3834.02 ─ 05
Usage: Event
Manual operation: See "Import / Export" on page 95
[:SOURce<hw>]:CORRection:DEXChange:MODE <Mode>
Determines import or export of a user correction list.
Specify the source or destination file with the command [:SOURce<hw>]:
CORRection:DEXChange:SELect.
Parameters:
<Mode> IMPort | EXPort
*RST: IMPort
Example: See Example "User correction data exchange" on page 584 .
Manual operation: See " Mode " on page 94
[:SOURce<hw>]:CORRection:DEXChange:SELect <Filename>
Selects the ASCII file for import or export, containing a user correction list.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "User correction data exchange" on page 584 .
Manual operation: See "Select Source/Select ASCII Destination" on page 95
13.16.4 SOURce:FREQuency Subsystem
The SOURce:FREQuency subsystem contains the commands used to define the fre-
quency settings for the RF sources and sweeps.
Example: Frequency configuration
SOURce1:FREQuency:MODE CW
SOURce1:FREQuency:CW 6000000000
SOURce1:FREQuency:OFFSet 2000000000
SOURce1:FREQuency:MULTiplier 1.5
SOURce1:FREQuency:CW?
// 11000000000
// SOURce1:FREQuency:STEP:MODE USER
// SOURce1:FREQuency:STEP:INCRement 1000000
// SOURce1:FREQuency:CW UP
SOURce1:PHASe 2
SOURce1:PHASe:REFerence
SOURce Subsystem
To Next Page
Loading...
