Improving Level Performance
R&S
®
SMA100B
242User Manual 1178.3834.02 ─ 05
The sensor calculates the pulse parameters from each measurement and delivers the
results to the R&S SMA100B.
The indication state of the parameters also affects the save function. Storing the mea-
surement diagram as hardcopy includes the parameters selected in this dialog.
A total of 6 parameters can be indicated at one time. Structured hierarchically, trace 1
features top priority and trace 4 is addressed with the lowest weighting. This means
that only the first 6 checked parameters are indicated, starting with the settings of trace
1.
The pulse data is only visible for certain zoom levels of the diagram.
Configure Trace Pulse Data
Access:
1. Select "Clk Syn/Power Sens" > "NRP Power Analysis".
2. In the diagram window, open the context-sensitive menu.
3. Select "Trace/Pulse Data Notifications/ Trigger".
4. Select the "Trace" tab.
Using Power Sensors
To Next Page
Loading...
