ROJ SUPER ELF X3 - Features and Characteristics

SUPER ELF X3
–
Dornier
4
Features and
Characteristics
o The Weft Feeder can be set for rotation S or Z depending on the yarn
twist.
o Yarn separation is adjustable from 0.7 mm to 2.2 mm.
o Coils detection by means of photocells (Barrier system).
o Storage detection with an integrated
photocell (barrier system).
o Input Weft breakage control through a photocell integrated in the Super
Elf X3, or through
external TFE6 weft Stop Motion device.
o Weft length adjustment, by setting the spool body diameter and the
number of coils to be
rel
eased at each insertion.
o Range of weft lengths: from 64 to 672 cm.
Note
: Weft lengths ranging from 87 to 96 cm CANNOT BE MEASURED.
o CAN BUS communication protocol with the loom Control.
o Pulsar HP brake control.
o Full and half weft threading by me
ans of a pneumatic system.
o New Electromagnet design.
o Reserve Storage position Photocell reliable also in dust environments.
o Permanent Magnet motor for more accurate speed control, faster
acceleration, full torque at
all speeds and lower energy
consumption.
o Sealed motor, photocells housing and cable connections are IP63 Water
Proof standard
o New anti
-
balloon design with reclining Funnel simplifies maintenance and
optimizes space requirements for multi
-
color applications.