ROJ SUPER ELF X3 - Back Panel Control Elements

SUPER ELF X3
–
Dornier
6
Back panel control elements
1
CONNECTION OF AIR LINE INPUT
2
CONNECTION OF AIR LINE FOR FULL AIR THREADING
Full air threading is possible only in combination with Funnel. If the feeder is fitted
with eyelet
holder, or without any balloon
control, this connection must be closed with
relevant plug that it
is supplied with the feeder.
3
HALF THREADING BUTTON
Insert the yarn into the eyelet and press the half threading button (3), whilst lightly
holding the
yarn.
4
FULL THREADING BUTTON
Insert the yarn into the eyelet and press the full threading button (4), whilst lightly
holding the
yarn.