Roland Alpha Juno-2 - TEST MODE

4. Tone Modify
TONE MODIFY
MOD RATE @ MOD DEPTH @ BRILLIANCE @ ENV TIME
Several parameters of a tone color can be simul-
taneously changed with a simple operation. There
This mode changes the rate of the vibrato, growl or chorus effect.
are four modes for the Tone Modify.
Tone Modifty
Mode Button ®
Modulation Rate
Modulation Depth
Brilliance
Envelope Time
<OPERATION>
@ Call the tone color you wish to edit.
@ Select one of the four modes by pushing
the corresponding Tone Modify Mode
Button @®.
The Display will respond as shown right:
@® Using the a Dial @, modify the tone color
to your taste.
Rotating the a Dial will change the Display ® as
shown below.
Rotating it counterclockwise
This mode changes the depth of the vibrato or growl effect.
This mode changes the brilliance of the sound.
This mode changes the time needed for a tone color to change
from the moment the key is played.
Modulation Rate ¥
Brilliance V
Envelope Time V
Rotating it clockwise
t
Original Tone Color
* The edited tone color will be erased by selecting
a different tone color. To retain the edited patch,
take an appropriated writing procedure. (See
page 29.)
* This Tone Modify operation may have no effect
on some tone colors. For instance, the tone
color without vibrato or growl effect will not
change at all even by changing the depth or rate
of the Modulation effect.
13