Roland Alpha Juno-2 - CIRCUIT DESCRIPTION

[2] Connection
Ca
Roland
606
&
666666
i]
/
eaaeameeees ae a REEL
Soe
Memory Cartridge
M-64C (Option)
Refer to page 31 “MIDI”. |
Usually, this should be
set to the ON position
Ta ic
Expression Pedal Switch Stereo
Pedal EV-5 DP-2 Headphones
(Optional) (Optional) RH-10
(Optional)
[3] OPERATION
1. Power Up
@ Make sure that the Memory Protect
Switch @ on the rear panel is set to the
ON position.
@ Turn the Power Switch ® on.
The Display Window @® will respond with:
This is shown for a few seconds
Then the Display changes
Tone Name
2. Tone Color Selection
Any of the 128 different tone colors (192 tone col-
ors when the optional Memory Cartridge is used)
can be called by using the Group Selector Button
@, the Bank Selector Button @ and the Number
Selector Button ®.
@®Bank Selector Buttons
ot
cmese) semen canrmce | | SAE CEN COU COUN CE CN GEE
000 —— oa oe co
@Group Selector Buttons @Number Selector Buttons
The Display @ shows the tone color currently
selected:
Group Bank Number Tone Name