Roland Alpha Juno-2 - Loading from the Cartridge to the Memory Group

b. Loading from the Cartridge to the Memory Group
<OPERATION>
@® While holding the Data Transfer Button ©
down, push the [4] (Cartridge Load) button
in the Number Selector Buttons ®.
The Display @ will change to:
While holding the Data Transfer Button @ down:
When the Number Selector Button [4] is pushed:
@ Set the Memory Protect Switch @ to the
OFF position.
@ Push the Cartridge button in the Group
Buttons @.
The Display ® will change to:
When the loading starts:
When the loading is correctly done:
@® Return the Memory Protect Switch ® to
the ON position.
37