Roland Alpha Juno-2 - BOARD SCHEMATICS

6. Edit
Here, call each parameter of a tone color and
change it. Regarding the details of the parameters,
see page 18 "7. Tone Color Parameters”.
<OPERATION >
@ Call the tone color you wish to edit.
@ Push the Parameter Selector Button @.
The Display will respond with:
Example V
Parameter Name value
@ Using the a Dial @, call the parameter you
wish to change.
@® Push the Value Button ®.
As shown in the picture, on the right of the Display
@, the current vaiue and the prospective value are
shown.
Example ¥
Previously set value New value
© Using the a Dial @, change to the value
you like.
© Repeat the steps @ to © as many times
as necessary,
17