Roland Alpha Juno-2 - FUNCTIONAL CHECKS

14
5. Editing Performance Control Functions
Using the Tune/Function Button @, you can
change the settings (data) of the Tuning and other
functions for performance control. The changed 1. Tuning
data is erased when the unit is powered off. If you
wish to retain the data even after powered off, take
2. Modulation Sensitivity
an appropriate writing operation. 3. Portamento Time
4. Preset Tone Colors’ DCO
Bender Range
5. Pedal Switch
a. How to edit the Performance Control Functions
<OPERATION >
@ Press the Tune/Function Button @ until
the Display @ shows the function you
wish to edit.
1. Tuning
2. Modulation
Sensitivity
5. Pedal Switch
As shown in the picture, each time you push the
Tune/Function Button @, the function shown in
the Display changes.
@ Using the a Dial, change the value of the
function to your taste.