Roland Alpha Juno-2 - Data Transfer with MIDI

c. Data Transfer with MIDI
This function is available even when the MIDI Exc-
lusive in the MIDI Functions is turned off.
CONNECTION
(Transmit a JUNO)
MIDI IN
MIDI OUT
(Receive.a JUNO)
<OPERATION>
@ Turn the Memory Protect Switch ® on the
receive a JUNO to the OFF position.
@ On the receive a JUNO, push the Number
Selector Button [2] (*! Bulk Load) while hold-
ing the Data Transfer Button © down.
The Display @® will react as shown below, and the
unit is ready to receive data.
While holding the Data
Transfer Button @ down.
’
When the Number Selector Button [2] is pushed.
@® On the transmit a JUNO, push the
Number Selector Button [1] (*? Bulk Dump)
while holding the Data Transfer Button @
down.
The Display ® will react as shown below, and the
unit will begin to transmit data.
While holding the Data
Transfer Button @ down.
Y
When the Number Selector Button [3] is pushed.