Roland Alpha Juno-2 - Error Message Table ou

2. Error Message Table
You have tried to write into the back-up memory
with the Memory Protect Switch @ set to the ON
position.
You have tried to use the Cartridge Group without
connecting the Cartridge.
You have tried to write into the cartridge with
the protect switch on the cartridge set to the ON
position.
The bulk dump data has not been completely
received.
The bulk dump data has not been completely
transferred.
The battery for back-up memory is flat.
* When this indication is shown, the data in the
back-up memory is lost. Consult with your local
Roland dealer.
43