Roland Alpha Juno-2 - Page 24

O VCF ENV Depth
Example ¥
This parameter controls the cutoff point of the VCF
in each note with the ENV curve set in the ENV
section. As you increase the value, tone color
within one note changes more drastically. 0 to 127
are valid for this parameter.
VCF ENV Mode
Example V
This is to select the polarity of the Envelope curve
that controls the cutoff point of the VCF. Usually,
"f\" may be used, in" V’" mode, ADSR pattern
will be inverted.
Display ® Function
fe~., ENV serves to increase the VCF’s cutoff point.
ENV serves to decrease the VCF's cutoff point.
Normal with
Dynamics
The ENV with Dynamics serves to increase the VCF’s cutoff point.
This modeisrather special; the ENV has nothing to do with the VCF’s
or cutoff point and the Dynamics directly works to increase the VCF’s
cutoff point.
Dynamics
QO VCF LFO Depth
Example V
This parameter sets the depth of the LFO modula-
tion that changes the cutoff point of the VCF
(=growl effect).
0 to 127 are valid for this parameter.
OG VCF Keyboard Follower
Example V
This parameter can shift the cutoff point depending
on the key played (=pitch). 0 to 15 are valid, and
decreasing the value will make the higher pitch
softer.
a VCF Aftertouch Sensitivity
Example ¥
When the Aftertouch is controlling the cutoff fre-
quency of the VCF, this parameter sets the sen-
sitivity of the effect.
0 to 15 are valid for this parameter.
24