8
2-1. System Requirements
System Requirements for USB Connection
Making a USB connection with Windows requires use of a computer that meets all of the following system requirements. Please note
that other configurations cannot be supported.
Part 2 Windows Section
Operating System
Computer Conditions
• The ability to make a USB connection depends on the specifications of the computer. To determine whether the computer you're using is capable
of correct USB operation, check with the manufacturer of the computer.
• Use a shielded USB cable having a length of 3 meters or less. Do not use a USB hub or the like.
System Requirements for Roland CutChoice (Windows)
Processor
RAM
Install space
Working disk space
Operating System (*)
Video system
Other
Supported models
Compatible programs
Connection
Pentium II 233 MHz or higher
128 MB or more
100 MB
1 GB or more
Latest version of Windows 98/Me/2000
800 x 600 screen resolution with 16 bit color or more
4x CD-ROM drive or faster
CAMM-1 PRO CX-500/400/300
Adobe Illustrator 8/9/10, CorelDRAW 8/9/10
USB
* This software only supports computer that have these OS factory installed. Computers with user upgraded OS may not work properly.
System Requirements for CAMM-1 Driver
Operating System (*) Windows 95/98/Me, Windows NT4.0/2000/XP
Windows 98/Me or Windows 2000/XP
(Windows 95 and Windows NT 4.0 are not supported.)
1) Computers preinstalled with Windows 98/Me/2000/XP at the time of purchase
(This includes such computers later upgraded to Windows Me/2000/XP.)
2) Computers on which USB operation is assured by the manufacturer of computers
* Making a USB connection requires a computer that meets the system requirements for USB connection described above.
* There are two types of CAMM-1 driver: one for Windows 95/98/Me and one for Windows NT4.0/2000/XP. When you carry out the
installation procedure described later, the correct driver is selected automatically.
To Next Page
Loading...
Need help?
General