Roland Edirol R-05 - Page 26

27
Getting Ready
3.
Install the batteries.
Install two AA batteries in the compartment,
making sure that the polarity (+/– orientation) is
correct.
fig.battery-3.eps_60
4. Close the cover of the battery compartment.
5. Slide the [POWER] switch toward POWER for
several seconds; the power will turn on. To
turn the power off, slide the [POWER] switch
once again toward POWER for several seconds.
fig.power-onoff-e.eps_60
When the power turns on, a screen like the
following will appear in the display. We’ll call this
the “main screen.”
6. Specify the type of batteries you installed.
In the “Menu” screen, specify the type of
batteries you installed (alkaline batteries or
nickel-metal hydride batteries).
“Settings for the R-05” (p. 89)
+–
+
–
On/o
R-05-e.book 27 ページ ２０１０年２月１９日 金曜日 午後４時５５分