Roland FP-80 - Detailed Function Settings (Function Mode); Adjusting the Dual Play Volume Balance (Dual Balance); Adjusting the Split Play Volume Balance (Split Balance); Changing the Pitch of the Tone in Octave Steps (Octave Shift)

Detailed Function Settings (Function Mode)
Parameter Value Explanation
Dual Balance
Adjusting the Dual Play Volume Balance (Dual Balance)
You can adjust the volume balance between the two tones (tone 1 and tone 2) used for Dual Play (p. 14).
MEMO
During Dual play, you can also adjust the volume balance between tone 1 and tone 2 by holding down the TONE button
and pressing the [
BACKING] or [KEYBOARD ] button.
9-1 (tone 1 is louder)–9-9 (same volume)–1-9 (tone 2 is louder)
Split Balance
Adjusting the Split Play Volume Balance (Split Balance)
You can adjust the volume balance between the two tones (right-hand tone and left-hand tone) used for Split Play (p. 15).
MEMO
During Split play, you can also adjust the volume balance between the right-hand tone and left-hand tone by holding
down the TONE button and pressing the [ BACKING] or [KEYBOARD ] button.
9-1 (left-hand tone is louder)–9-9 (same volume)–1-9 (right-hand tone is louder)
Octave Shift
Changing the Pitch of the Tone in Octave Steps (Octave Shift)
You can change the pitch of the Tone 2 in Dual Play (p. 14) and Left-hand tone in Split Play (p. 15) an octave at a time.
Altering the pitch in one-octave units in this way is called “Octave Shift.”
For example, you can raise the pitch of the Left-hand tone to the same pitch of the Right-hand tone in Split Play.
-2–0–+2 (octave)
Split On Recognize
(Split On Chord
Recognize)
Chord Recognition When Split Is On (Split-On Chord Recognition)
Sets how the FP-80 recognizes rhythm chords while Split Play is on.
MEMO
When Split Play is o, chords are recognized as follows.
While the damper pedal is not pressed, the FP-80 recognizes a chord when 3 or more keys are struck.
While the damper pedal is pressed, the FP-80 recognizes a chord when 1–5 keys are struck.
Standard Normal chord recognition.
Intelligent
Play chords even when basic chord tones are missing. Allows you to generate chords with very simple
keyboard playing.
REFERENCE
For details about chord ngering, see “Chord Fingering List” (p. 61).
Easy
Allows you to specify chords with very simple keyboard playing.
Major: Just play the chord root.
Minor: Play the root and a black key to the left of the root.
Seventh: Play the root and a white key to the left of the root.
Minor Seventh: Play the root and both a white key and a black key to the left of the root.
Chord Pattern Root
Setting the Root for Chord Progression (Chord Pattern Root)
Specify the root of the rst chord when you turn on the chord pattern play to start the rhythm.
C, C
, D, E , E, F, F , G, A , A, B , B
Equalizer
Use equalizers to modify the tone color by boosting or attenuating various frequency ranges.
REFERENCE
For details, refer to “Editing the equalizer settings” (p. 18).
Damper Pedal Part
Changing How the Pedal Eects Are Applied (Damper Pedal Part)
When you press the pedal connected to the DAMPER/R jack during Dual Play or Split Play, the pedal eect is normally applied to both tones,
but you can also select the tone to which the eect is to be applied.
Right & Left All enabled
Right Applied only to the Tone 1 (in Dual Play mode)/Right-hand Tone (in Split Play mode)
Left Applied only to the Tone 2 (in Dual Play mode)/Left-hand Tone (in Split Play mode)
For details about how to make function
mode settings, see p. 44.
45
Operation Guide Getting Ready Performing Recording Designing Sounds Microphone Registrations AppendixSettings