Roland FP-80 - Detailed Function Settings (Function Mode); Audio Transpose; Center Cancel; Mic Ambience

Detailed Function Settings (Function Mode)
Parameter Value Explanation
Audio Transpose
The selected audio le and the sound of a digital audio player connected to the Input jack can both be transposed for playback.
* For some songs, an audio transpose setting other than 0 may aect the tone quality of the sound.
REFERENCE
For details, refer to “Transposing an Audio File (Audio Transpose)” (p. 25).
Center Cancel
You can minimize the playback of sounds located in the center of the sound eld (e.g., vocals or melody instruments) of the selected audio
le or music from a digital audio player connected to the INPUT jack.
* For some songs, sounds located in the center might not disappear completely, or the tone quality of the sound might be aected.
REFERENCE
For details, refer to “Lower the Level of an Audio File’s Central Sound (Center Cancel)” (p. 25).
Mic Ambience
Lets you add reverberation to vocals from the microphone.
Reverberation can improve the sound of your vocals.
REFERENCE
For details, refer to “Adding Reverberation to Your Voice (Mic Ambience)” (p. 35).
Harmony Type
Lets you adjust the way that harmony is applied.
REFERENCE
For details, refer to “Changing How Harmony Is Applied (Harmony Type)” (p. 35).
Recording Mode
Selecting the Recording Format (Recording Mode)
Select whether performances are recorded in SMF format or audio format.
MEMO
You can also switch the recording mode by holding down the [REC] button and pressing the [–] [+] buttons.
SMF
Record as MIDI data. This data holds information about each note played (its pitch, duration, force, etc.). It does
not hold any actual audio data.
Audio Record as audio data. The recorded song can be used in your computer.
Copy Song
Use this function to copy a song from internal memory to a USB ash drive, or from a USB ash drive to internal memory.
REFERENCE
For details, refer to “Copying a Saved Song (Copy Song)” (p. 41).
Delete Song
Use this function to delete a song from internal memory or a USB ash drive.
REFERENCE
For details, refer to “Deleting a Saved Song (Delete Song)” (p. 41).
Save Regist. Set
Save all registrations from the [REGISTRATION] button’s memory into internal memory or on a USB ash drive.
REFERENCE
For details, refer to “Saving a Registration Set (Save Registration Set)” (p. 37).
Load Regist. Set
Load a registration set from internal memory or a USB ash drive into the [REGISTRATION] button’s memory.
REFERENCE
For details, refer to “Loading a Saved Registration Set (Load Registration Set)” (p. 38).
Copy Regist. Set
Copy a saved registration set from internal memory to a USB ash drive, or from a USB ash drive to internal memory.
REFERENCE
For details, refer to “Copying a Saved Registration Set (Copy Registration Set)” (p. 38).
Delete Regist. Set
Delete a saved registration set from internal memory or a USB ash drive.
REFERENCE
For details, refer to “Deleting a Saved Registration Set (Delete Registration Set)” (p. 39).
Format Media
Formats internal memory or a USB ash drive, deleting all songs stored in that memory.
REFERENCE
For details, refer to “Reformatting Memory (Format Media)” (p. 43).
Sending Tone-Change Information (Transmit MIDI Information)
When you switch registrations, the FP-80 simultaneously transmits the following: Program Change, Bank Select MSB, and Bank Select LSB.
You can also set the transmit channel.
Regist. Tx Ch.
O, 1–16 Sets the Program Change transmit channel.
Regist. Bank MSB 0 (00)–127 (7F) Sets the Bank Select MSB/LSB.
Regist. Bank LSB 0 (00)–127 (7F) Sets the Bank Select MSB/LSB.
Regist. PC 1 (00)–128 (7F) Sets the Program Change number.
For details about how to make function
mode settings, see p. 44.
47
Operation Guide Getting Ready Performing Recording Designing Sounds Microphone Registrations AppendixSettings