Roland G-800 - Source\Cntrl page

Parameter mode, Source\Cntrl page
Source\Cntrl page
The Source switches on this page only apply to the Realtime parts. Use [PAGE] A/V to
select the part whose source setting you wish to modify (its name appears in the scroll bar).
fe) Extra Bender Pitch Bender Range
D
ll PERFORMANCE MEM i SONG SELECTION
"nem sarc meee AR TA NAAA TTD TREINTA CRIT TS
> Master page: [F2] (Param)> [SHIFT] + [F3] (Cntrl)
See “Source switches” on page 38 for an explanation of the Source switch options.
Source
Meaning
Extra Bender The Extra Bender settings of the currently selected part (see page 36).
Pitch Bender
Range The pitch bend Range setting of the currently selected part (see page 34).
j
39