Roland G-800 - Chapter 5. Parameter mode; Parameter\Glbal\1 page

G-800 Reference Manual
5 Parameter mode
As stated in the Player's Guide, the parameter mode contains parameters that apply to differ-
ent aspects of your G-800:
(1) Global parameters
Master Tune, Metronome functions, Memory Protect, etc.
(2) Arranger parameters
Chord Family Assign, Part Range, etc.
(3) Realtime parts
Upper 2 Tune, Upper! & 2 Portamento, etc.
(4) Controller parameters
Expression Pedal assignment, Extra Bender settings, etc.
(5) Performance Memory parameters
Resume, Performance name.
(6) Source switches for some of these parameters
Parameter\Glbal\1 page
Memory Resume Cursor Charactr jaen
m FrEe Pri
1 t i
` .
ki + a
© -¢- -@- -@-
EE
PERFORMANCE MAME |
D Master page: [F2] (Param)— [F1] (Glbal)
[PAGE] A/Y (select page 1)
Memory locked/unlocked (cioval parameter)
This parameter allows you to activate (lock) or deactivate (unlock) the Memory Protect func-
tion. At power on, the G-800 always turns on its Memory protection to avoid accidental eras-
ure of data. Note that is next to impossible to accidentally overwrite a Performance Memory
or MIDI Set because you have to keep the [WRITE] button depressed while specifying the
memory number. Furthermore, you are give the opportunity to turn off Memory protection
before writing data to one of the G-800’s memories.
Resume (Performance Memory parameter)
The Resume function allows you to specify which settings of the Performance Memory 00
are to be loaded. Performance Memory 00 FreePan! contains a number of default settings and,
more importantly, Source switch settings that allow a Standard MIDI File or Music Style to
change the affected parameters in accordance with the settings it contains.
24