Roland G-800 - Chapter 2. Volume pages and Volume mode; Master page: [VOLUME]; Volume control (fader assignments)

G-800 Reference Manual
). Volume pages and Volume mode
> Master page: [VOLUME]
Or rotate one of the five knobs
On the Master page, the 5 knobs are assigned to the volume of the Real Time parts [Upp 1 -
Upp 2 - Lower - M. Bass - M. Drum]. Whenever you rotate a knob, the Volume page will be
selected (and the [VOLUME] indicator starts flashing).
A FAA
MDR ADR RL nes abs En MPa Jri VOLUME
Rotate the knob one more time to change the volume of the part assigned to that knob. The
Volume page will disappear after a few seconds of inaction. If, however, you press the [VOL-
UME] button (indicator lights steadily), the Volume page will be displayed until you press
the [VOLUME] button once more.
On this page, the Part Select buttons can be used to mute (lowercase part names) or activate
(uppercase) parts.
Volume control (fader assignments)
The knob located below each section allows you to control the level of the corresponding part.
When you press [F1], certain faders are grouped, which means that they control two sections
(MDR & ADR, MBS &ABS, UP1&UP2).
Using the function keys [F1]-[F4], you can change the knob/part assignments, thereby ena-
bling individual control of the Volume parameters.
(a) [F2] (Only the right faders)
00 00 ©
(b) [F3] (Only the left faders)
MDR ADA Jeca MBS abs Twr