Roland GAIA 2 - Page 87

87
Navi
MFX List
Parameter Value Explanation
RDly HF
Frequency at which the high-frequency content of the reverse-delayed sound will be cut (BYPASS: no
cut)
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS
[Hz]
RDly Pan
L64–63R Panning of the reverse delay sound
RDly Level
0–127 Volume of the reverse delay sound
Dly1 Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
D1.Time
1–1300
Delay time from when sound is input into the tap delay until the delay
sound is heard
D1Time Nt
Note
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,
1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
Dly2 Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
D2.Time
1–1300
Delay time from when sound is input into the tap delay until the delay
sound is heard
D2Time Nt
Note
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,
1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
Dly3 Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
D3.Time
1–1300
Delay time from when sound is input into the tap delay until the delay
sound is heard
D3Time Nt
Note
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,
1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
Dly3 Fbk
-98–+98 [%]
Proportion of the delay sound that is to be returned to the input of the tap
delay (Negative values invert the phase).
Dly HF
Frequency at which the hi-frequency content of the tap delay sound will be cut (BYPASS: no cut)
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS
[Hz]
Dly1 Pan
L64–63R
Panning of the tap delay sounds
Dly2 Pan
L64–63R
Dly1 Lv
0–127
Volume of the tap delay sounds
Dly2 Lv
0–127
Low Gain
-15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance
D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
Level
0–127 Output Level