Saving a Tone
21
Saving a Tone
Any settings you have edited for a tone are lost if you select a different patch or turn off the power after editing. For this reason, be
sure to save your important settings.
A dot is shown in the display once you edit a tone.
1.
Press the BANK [1 (5)]–[4 (8)] buttons to select the group and bank where you want to save the data.
2.
Long-press one of the NUMBER [1]–[8] buttons to select the patch number you wish to save to.
The display blinks several times. The tone is saved in the patch number you selected.
To Next Page
Loading...
