Using the Sequencer
28
Playing Patterns
Here’s how to play back a pattern you’ve selected.
1.
Select the pattern to play back (8.1. Selecting a Pattern(P.26)).
2.
Press the [START] button to make the indicator light.
This plays back the pattern.
By holding down the [START] button and pressing the PART [A] or [B] button, you can mute the playback of the respective part.
The indicators blink for parts that are muted.
Tempo Settings
Sets the pattern’s tempo.
1.
Press the [SEQ] button to make the indicator light.
The unit enters sequencer mode. The current tempo is shown on the display.
2.
Turn the [VALUE] knob to set the tempo.
You can switch between the tempo and patch displays with each press of the [VALUE] knob.
To Next Page
Loading...
