Roland JX-08 - Mod Delay

Effect Parameters
49
Step
buttons
Parameter Value Explanation
[1]
tyPe dLy2
The delay sound is heard both at the left and
at the right.
[2]
Sľ
Off
,
On
Turns the effects on/off.
[3]
Sync
Off
,
On
When this is ON, the effect synchronizes with
the tempo of the rhythm.
“8.2.1. Tempo Settings(P.28)”
[4]
TiNE
1
–
2600
(ms)
Adjusts the delay time from the direct sound
until the delay sound is heard.
[5]
notE
“12.1.18. About note values(P.57)”
[6]
Fb
-98
–
98
(%)
Adjusts the proportion of the delay sound
that is fed back into the effect. (Negative
values invert the phase.)
[7]
H.dNP
200
,
250
,
315
,
400
,
500
,
630
,
800
,
1000
,
1250, 1600, 2000, 2500, 3150, 4000, 5000,
6300, 8000 (Hz), byPS
Center frequency at which the high
frequencies of the delay sound fed back to the
input are cut
(
byPS
: does not cut the frequencies)
[8]
PAn1
L 64
–
r 63
Delay 1 pan
[9]
PAn2
L 64
–
r 63
Delay 2 pan
[10]
LUL1
0
–
127
Delay 1 volume
[11]
LUL2
0
–
127
Delay 2 volume
[12]
EQ.Lo
-15
–
15
(dB)
Amount of low range boost/cut
[13]
EQ.Hi
-15
–
15
(dB)
Amount of high range boost/cut
[14]
bAL
Volume balance between the effect sound and dry (original) sound
0
Effect sound : Dry sound = 0 : 100
100
Effect sound : Dry sound = 100 : 0
[15]
LEU
0
–
127
Output level
You can also press a step button to select the parameter items.
Mod Delay
When Feedback Mode is “norN” (NORMAL)