Roland KF-7 - Performing with a Variety of Tones (Tone Buttons)

21
Chapter 1 Performance
Chapter 1
Performing with a Variety of Tones
(Tone Buttons)
The KF-7 comes with a many built-in instrument sounds and effects. This lets you
enjoy perform in a wide range of musical styles.
The built-in sounds are called “Tones.” The sounds are organized into six tone
groups, which are assigned to the [Tone] buttons.
fig.panel1-2
1. Press any one of the Tone buttons to select a tone group.
You’ll see that button’s indicator light up.
The screen displays the tone names included in the tone group you’ve selected.
fig.d-tonesel.eps_60
This screen is called the “Tone selection screen.”
You can touch <Audition> for an audio demonstration of a particular tone.
Touch to switch the screen and display the next selection.
You can touch <Effects> to add effect sounds to a variety of tones (p. 32).
You can touch <Search> to find tones according to the search criteria you specify
(p. 23).
2. Select a tone, then touch the tone name.
You’ll hear the tone you’ve selected when you play the keyboard.
You can use the [-] [+] buttons and the dial to automatically switch pages and select
tones.
3. Touch <Exit>.
This returns you to the Basic screen or the previous screen.
For more about the names of
Tones, take a look at the “Tone
List” (p. 165).