Roland KF-7 - Having a Count Sound Play at the End of the Intro (Countdown)

56
Chapter 2 Automatic Accompaniment
Chapter 2
■ Having a Count Sound Play at the End of the
Intro (Countdown)
If an intro plays before your performance, you can have a count-in sound played to
the end of the intro, helping you hear when to start playing.
fig.countdown.e
1. Press the [Metronome] button and watch the indicator light up.
The Metronome screen (p. 40) appears.
If you don’t want the metronome to play, press the [Metronome] button and
indicator light goes out.
2. Touch <Countdown>.
The following “Countdown settings screen” appears.
fig.d-cntdwn.eps_60
3. Touch <Switch> to set this to “ON.”
When you press the One Touch Program [Arranger] button, the performance starts,
and the countdown sound plays at the end of the intro.
❍ Cancelling the countdown
1. In the Metronome screen, touch <Countdown>.
2. Touch <Switch> to set this to “OFF.”
This sets the KF-7 so that the countdown does not play.
Count Sound
1234
When the Intro has finished playing,
the accompaniment plays.
Ex: 4/4
Intro
For more about settings on the
Countdown screen, refer to
“Settings for the Countdown”
(p. 147).