Roland LEC-300 - Page 12

Installing the Ink Cartridges
10
1. Changes to the Setup Guide1. Changes to the Setup Guide
3. Press .
4. Make sure the drain bottle is installed.
INSTALL
DRAIN BOTTLE
5. Press .
6. Insert the SOL INK cleaning cartridges into slots 1, 2, 3, and 4.
SET CL-LIQUID
1 2 3 4
FILLING INK...
>>
7. When this screen appears, pull out the SOL INK cleaning cartridges.
REMOVE CL-LIQUID
1 2 3 4
8. Insert the SOL INK cleaning cartridges you pulled out into slots 5 and 6.
SET CL-LIQUID
5 6
FILLING INK...
>>>>
9. When this screen appears, pull out the SOL INK cleaning cartridges.
REMOVE CL-LIQUID
5 6
FILLING INK...
>>>>>>>>