Roland MDX-40A Step-By-Step Guide

3
++++++Think how best to cut the object
++++++++ Making a prototype with single side cutting only.
++++++++ The method for two sided cutting a solid object using supports and frame.
++++++++ The method for two sided cutting a solid object without supports and frame.
++++++++ The method using rotary axis (4 axes).
++++++++ Combined cutting
One side cutting
,-Before you start
++++++++++Think about material and tools
++++++++++The workflow of this guide
.-Before you start cutting
+++2-1+What you will need
2-2+Equipment Configuration/Machine, Software, Driver0
++++++1MDX-40A transportation clamps
++++++1Preparation of PC and software
++++++1SRP Player settings
+++2-3+Starting the MDX-40A and VPanel
2-Setup Tasks. Cutting the Base and workpiece
++++3-1+Preparation of the surface - levelling the base
+++++++++Preparation of the base
+++++++++Installing the surface levelling tool
+++13-2+Setting the origin point of MDX-40A
+++++++++Setting the X- and Y- axis Origin Point
+++++++++Setting the Z-axis Origin Point
+++++++++Surface levelling the base
+++++++++Preparation of the workpiece for model and surface levelling
3-Creating the cutting tool path
+++1 ++++Setting of the each process
4-Cutting the model
+++++++++Start cutting
Contents
!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
4
6
7
9
10
11
12
12
13
15
16
17
19
19
20
21
23
24
29

Roland MDX-40A Specifications

General

Brand	Roland
Model	MDX-40A
Category	3D Printers
Language	English