Roland RD-600 - Advanced Chorus Settings; Chorus PreDelay and Feedback; Specifying Chorus Output Destination

ES ES TE ER IE ESI IE TN ISTE SE I IES EY IIT INTE DIE TINSLEY EET NT LPI PTET EGE DER IPOS ODED POTTING,
Time until modulation begins (ChorusPreDelay)
This adjusts the time from when the original sound is heard until when the chorus sound is
heard. The sound will become more spacious as this value is increased.
EChorusPretn ] su
F OF
Range of values: 0-127
Making modulation more distinctive (ChorusFeedback)
This setting adjusts the amount of the chorus sound that is returned (fed back) into the chorus.
Increasing this value will produce a more distinctive modulation.
EChorusFeedback +
F 4
Range of values: 0-127
Specifying the output destination (Chorus Output)
This setting determines how chorus and reverb will be connected.
EChorus Oubeut +
EMNIM+KEU
MIX: The chorus sound and reverb sound will be mixed.
Chorus
Amount
OUTPUT
Reverb
Amount
REV: Reverb will be applied to the chorus sound.
Chorus
Amount
TONE EFX g CHORUS i REVERB OUTPUT
Reverb
Amount
MIX+REV: Chorus sound without reverb will be mixed with chorus sound to which reverb has
been applied.
Chorus | |
Amount
A CHORUS si REVERB
Reverb
Amount
OUTPUT
* If Chorus Output is set to MIX+REV, reverb will be applied to the output of the chorus sound, mean-
ing that the sound will have reverb even if the Reverb Amount setting is 0.
37