Roland RD-600 - Velocity Max and Pedal Settings; Maximum Volume via Velocity; Damper Pedal and Foot Controller Settings

When Velocity Sensitibity is When Velocity Sensitibity is
set to a positive value (+) set to a negative value (-)
Volume Volume
0) 0
“32
Velocity Velocity
Specifying the maximum volume produced
by keyboard dynamics (Velocity Max) ......+.+.00000.--Default value: 127
This setting specifies the maximum volume that can be produced in response to your keyboard
dynamics. With lower settings, the volume will not increase very much even if you play the
keyboard strongly.
* For some Tones this function will not be usable.
Litelocite Max +
2 Range of values: 1-127
IMT Leizr
Damper pedal setting (DamperPedalSw).................Default value: ON
For each of the local parts, this setting specifies whether or not operations of a damper pedal
connected to the damper pedal jack will control the internal sound source or external MIDI
devices. Press the [INC/ YES] button to turn this ON, or press the [DEC/NO] button to turn it
OFF. With a setting of OFF, the damper pedal will not control the part.
LOaneerPedal Si +
INT Le OH Range of values: ON/OFF
Foot controller 1 setting (FC1 Pedal Sw) ..................Default value: ON
For each of the local parts, this setting specifies whether or not operations of a foot controller
connected to the FC1 jack will control the internal sound source or external MIDI devices. Press
the [INC/ YES] button to turn this ON, or press the [DEC/NO] button to turn it OFF. With a
setting of OFF, the foot controller will not control the part.
* For a list of the functions which can be assigned to Foot controller 1, refer to p.50.
LFCL Pedal =,
INT Le OH Range of values: ON/OFF
Foot controller 2 setting (FC2 Pedal Sw) ..................Default value: ON
For each of the local parts, this setting specifies whether or not operations of a foot controller
connected to the FC2 jack will control the internal sound source or external MIDI devices. Press
the [INC/YES] button to turn this ON, or press the [DEC/NO] button to turn it OFF. With a
setting of OFF, the foot controller will not control the part.
* For a list of the functions which can be assigned to Foot controller 2, refer to p.50.
LFCS Pedal Su Range of values: ON/OFF
IHT Le OH
43