Roland RD-600 - Page 58

RATE/SENS: Delay Time
This adjusts the time from the original sound until
when the delay sound is heard.
DEPTH/LEVEL: Feedback Level
This adjusts the proportion of the effect sound that is
once again returned to the input.
22. 2VOICE-PITCH-SHIFTER
This effect shifts the pitch of the original sound. This
is a two-voice pitch shifter which creates two pitch
shifts, and allows the pitch-shifted sound to be lay-
ered onto the original sound.
RATE/SENS: Fine Pitch A
This is a fine adjustment of pitch shift A pitch in 2-
cent steps.
DEPTH/LEVEL: Fine Pitch B
This is a fine adjustment of pitch shift B pitch in 2-cent
steps.
23. FBK-PITCH-SHIFTER
This is a pitch shifter with a feedback loop.
RATE/SENS: Coarse Pitch
This is a fine adjustment of the pitch shift in semitone
steps.
DEPTH/LEVEL: Feedback Level
This adjusts the proportion of the effect sound that is
once again returned to the input.
24. REVERB
This adds lingering reverberations to the original
sound to simulate sounds played in a spacious set-
ting.
RATE/SENS: Reverb Time
This adjusts the length of the reverberation.
DEPTH/LEVEL: Effect Balance
This sets the balance between the levels of the original
sound and the effect (reverb) sound.
25. GATE-REVERB
This reverb mutes the lingering reverberations before
they have completed their natural decay.
RATE/SENS: Reverb Time
This adjusts the length of the reverb.
DEPTH/LEVEL: High Gain
This sets the treble sound quality.
26. OVERDRIVE -> CHORUS
With this type, the Overdrive is connected in series
with the Chorus.
RATE/SENS: Chorus Rate
This sets the speed of the modulation.
DEPTH/LEVEL: Chorus Depth
This sets the depth of the modulation.
58
27. OVERDRIVE -> FLANGER
With this type, the Overdrive is connected in series
with the Flanger.
RATE/SENS: Flanger Rate
This sets the speed of the modulation.
DEPTH/LEVEL: Flanger Depth
This sets the depth of the modulation.
28. OVERDRIVE -> DELAY
With this type, the Overdrive is connected in series
with the Delay.
RATE/SENS: Drive
This adjusts the amount of distortion for the over-
drive. The volume will change together with the
amount of distortion.
DEPTH/LEVEL: Delay Time
This adjusts the time from the original sound until
when the delay sound is heard.
29. DISTORTION -> CHORUS
With this effect type, Distortion is connected in series
with the Chorus.
RATE/SENS: Chorus Rate
This sets the speed of the modulation.
DEPTH/LEVEL: Chorus Depth
This sets the depth of the modulation.
30. DISTORTION -> FLANGER
With this effect type, Distortion is connected in series
with the Flanger.
RATE/SENS: Flanger Rate
This sets the speed of the modulation.
DEPTH/LEVEL: Flanger Depth
This sets the depth of the modulation.
31. DISTORTION -> DELAY
With this effect type, Distortion is connected in series
with the Delay.
RATE/SENS: Drive
This adjusts the amount of distortion. The volume
will change together with the amount of distortion.
DEPTH/LEVEL: Delay Time
This adjusts the time from the original sound until
when the delay sound is heard.
32. ENHANCER -> CHORUS
With this effect type, the Enhancer is connected in
series with the Chorus.
RATE/SENS: Chorus Rate
This sets the speed of the modulation.
DEPTH/LEVEL: Chorus Depth
This sets the depth of the modulation.