Roland S-4000S - Computer Control (S-4000 RCS)

7—Advanced Use
72 S-4000 Digital Snake Owner’s Manual
Computer Control (S-4000 RCS)
The S-4000 Remote Control Software (S-4000 RCS) allows for the remote control and monitoring of
the S-4000 System from a personal computer equipped with an RS-232C port.
Functionally, using the S-4000 RCS is similar to using the S-4000R Remote Controller, but with the
conveniences provided by a personal computer.
S-4000 RCS features:
• S-4000S input channel control screen—View and adjust settings for all S-4000S channels from one
screen.
• Comprehensive input level meter screen—View input activity of all input channels from one
screen.
• 100 memory presets—Store and recall up to 100 different S-4000S input setups.
• Integrated monitoring and control of multiple systems—You can connect up to four S-4000 Systems
to multiple RS-232C ports on a personal computer. This allows for control and signal monitoring
of multiple systems from a single interface.
Where to Get the S-4000 RCS
The S-4000 RCS is available as a free download from www.RSSAmerica.com. Refer to the documentation
included with software for instructions on using it with the S-4000 System.
System Requirements
The S-4000 RCS is available for both Windows and Macintosh operating systems. Please visit
www.RSSAmerica.com for the latest S-4000 RCS version and current computer and operating system
requirements.