Appendices
88 S-4000 Digital Snake Owner’s Manual
RS-232C (REMOTE) Connector (D-Sub, DB-9-type)
Maximum recommended cable length: 15 meters.
Pin Number Signal Name Pin Connection
1 NC
2 TxD (Data Out)
3 RxD (Data In)
4 NC
5 GND
6 +5 V
7 Short to Pin 8
8 Short to Pin 7
9 NC
S-4000S Audio Connectors (XLR-type)
S-4000S Channel Numbers
To facilitate custom labeling for a particular installation or multiple S-4000 Systems, the S-4000S is
shipped from the factory without channel number labels on its input and output modules.
The illustratration below shows the S-4000S’s channel numbers as they correlate to the S-4000H’s
audio I/O and input channel selection on the S-4000R.
If desired, use the included adhesive-backed number label sheets to affix channel numbers to
the S-4000S’s input and output modules.
To Next Page
Loading...
