CV REF NOTE
CvrF - Sets the note value of 0V C1 - C0 - C4
AUTO OFF
AOFF - Auto Off Settings OFF - The power does not turn off automatically
30 - Power turns off automatically after 30 minutes
NOTE - Auto Off does not occur while USB connected.
LED DEMO
dEMO - Settings for LED demo OFF - SH-01A does not enter LED demo mode
1-3-10 - Sets the time in minutes before the demo begins
RIBBON CONTROLLER INPUT SCALE
rSCL - Sets the note scale type of the ribbon controller. The default is Chromatic
- CHrO - CHROMATIC
- naJ - MAJOR
- nnIn - NATURAL MINOR
- HnIn - HARMONIC MINOR
- nnIn - ASCENDING MELODIC MINOR
- bLnI - BLUENOTE
- bLn2 - BLUENOTE (with grace note)
- dOr - DORIAN
- nIHO - MIXOLYDIAN
- dIn - DIMINISHED
- WHOL - WHOLETONE
- ALt - ALTERED
- Hng - HUNGARIAN MINOR
- InSn - INSENPO
- ryuy - RYUKU
- PErS - PERSIAN
C2 MODULATION HOLD
C2nd - C2 Performance Setting - Hold keeps touch settings until manually reset
- OFF -OFF
- HOLd -HOLD
NOTE - These parameters are not global. They are saved with each individual patch
FIXED BATTERY OPERATION MODE
This mode prevents the unit from switching to bus power even if it is connected to a USB port. This allows the unit to
be used even with a USB port that does not supply power.
1.
While holding down the [7] button, turn on the power.
To Next Page
Loading...
