37
System Settings
Deutsch Français Italiano Español Português NederlandsEnglish
fig.d-Sys-Option-1.eps
fig.d-Sys-Option-2.eps
fig.d-Sys-Option-3.eps
fig.d-Sys-Option-4.epsm
The “Factory Reset” operation returns all settings of all pads and
drum kits stored in the TD-4 to their factory-set condition.
* If you want to return an individual kit to its factory settings,
execute the drum kit “Restore” operation (p. 33).
The settings stored in the TD-4 will be lost when you execute
a factory reset.
1. In the “Options” screen, press the SEL [ ] button
a number of times to choose “Factory Reset,” and
press the [OK] button.
fig.d-Sys-FRst-1.eps
2. Use the [-/+] dial to select the settings for which
you want to execute a factory reset.
3. Press the SEL [ ] button.
A confirmation message appears.
fig.d-Sys-FRst-2.eps
* If you decide to cancel, press the [MENU] button.
4. Press the [OK] button.
The factory reset will be executed.
When the factory reset is finished, the following message will
appear and you will return to the DRUM KIT screen.
fig.d-Sys-FRst-3.eps
Adjusting the Display Contrast (LCD Contrast)
Value
1–10
Adjusting the Brightness of the Backlight
(LCD Bright)
Value
1–10
Adjusting the Button Operating Sound
(Keypad Sound)
Value Explanation
OFF
The buttons will not produce an operating sound.
1–3 Specifies the volume of the operating sound.
Allowing the Head and Rim Settings to be
Edited Separately (Head/Rim Link)
Value Explanation
ON
Head and rim (or for a cymbal, the bow and
edge) settings (Instrument/Tuning/Muffling/
Pad Volume/Pan) will be edited simultaneously
for SNARE, HH, CRASH, and RIDE.
* If Crash 2 Usage is set to RIDE BELL, the
RIDE’s BELL will also be edited
simultaneously.
OFF
Head and rim settings will be edited separately
for SNARE, HH, CRASH, and RIDE.
Restoring the Factory Settings
(Factory Reset)
Value Explanation
PADS PAD SETTINGS parameter
SYSTEM
System Parameter
(OPTIONS and PAD SETTINGS parameter)
ALL KITS All Drum kit
ALL All of the TD-4’s data
TD-4_e.book 37 ページ ２００８年１１月５日 水曜日 午後６時４０分
To Next Page
Loading...
Need help?
General
