Roland TD-4KP - 2> Correctly Playing in Time with the Beat (TIME CHECK)

21
Practicing
Deutsch Français Italiano Español Português NederlandsEnglish
This mode lets you practice playing accurately along with the metronome.
Start practicing
fig.TimeCheck-1.eps
1. In the TIME CHECK start screen, press the [ ]
button to start practicing.
You can use the [-/+] dial to adjust the tempo even while you
practice.
2. Strike the pad in time with the metronome.
fig.TimeCheck-2.eps
• The screen will indicate whether your pad strikes match the
beat sounded by the metronome.
• The percentage of your strikes that were played with
accurate timing is displayed as a “%” value.
Scoring
If Score (shown at right) is “ON,” the Time Check will automatically
end when you’ve finished practicing the specified number of
measures. Then your performance will be scored, and the results
will appear in the screen.
fig.TimeCheck-Op4.eps
When you’ve finished practicing
3. Press the [OK] button to return to the Coach mode
menu screen.
Settings
1. In the TIME CHECK start screen, press the [MENU]
button so it’s lit.
fig.TimeCheck-Op1.eps
2. Use the SEL[ ] [ ]buttons to select a
parameter.
3. Use the [-/+] dial to edit the value.
4. Press the [MENU] button to return to the TIME
CHECK start screen.
Score:
Specifies whether the score will be shown in the screen.
fig.TimeCheck-Op1.eps
Grade:
Specifies the strictness of scoring.
fig.TimeCheck-Op2.eps
<2> Correctly Playing in Time with the Beat (TIME CHECK)
Lagging Rushing
Value Explanation
OFF
Your performance will not be scored.
Only the timing will be checked.
ON
(4, 8, 16, 32 meas)
The score will be shown in the screen.
You can also specify the number of mea-
sures you’ll practice before being scored.
Value Explanation
EASY Normal
HARD Timing will be checked more strictly.
TD-4_e.book 21 ページ ２０１２年９月１０日 月曜日 午後１時４３分