Roland TD-4KP - Creating a Drum Kit; Selecting the Parameters

26
Creating a Drum Kit
All sounds assigned to a drum kit can be edited for your specific purposes.
fig.P-KitMenu.eps
1. Use the DRUM KIT [<] [>] buttons to select the drum
kit that you want to edit.
2. Press the [MENU] button so it’s lit.
The drum kit settings menu screen will appear.
fig.d-KitMenu-1.eps
3. Use the SEL[ ] [ ]buttons to select the desired
menu (shown at right).
4. When you’ve selected the desired menu, press the
[OK] button.
You’ll move to the edit screen for the selected menu.
You can turn the [-/+] dial to select the pad whose settings
you want to edit.
5. When you’ve finished making settings, press the
[MENU] button to turn off its illumination; you’ll
return to the DRUM KIT screen.
Selecting the Parameters
2
134
Menu Parameter
p. 27
•Instrument
•Tuning
• Muffling
p. 28
• Volume of each pad
• Pan position of each pad
• Volume of the entire
drum kit
• Cross stick volume
p. 29
•Ambience Type
•Depth of ambience
p. 29
• Naming a drum kit
•Kit Copy (p. 30)
•Kit Exchange (p. 31)
• Kit Restore (p. 32)
TD-4_e.book 26 ページ ２０１２年９月１０日 月曜日 午後１時４３分