Roland TD-4KP - Specifying How the CR2 Trigger Cable will be Used; Other Settings (OPTIONS)

35
System Settings
Deutsch Français Italiano Español Português NederlandsEnglish
* This parameter is inactive on the TD-4KP.
1. Press the [MENU] button so it’s lit.
The MENU screen appears.
fig.d-KitMenu-1.eps
2. Use the SEL [ ] [ ] buttons to choose
“9 OPTIONS,” and press the [OK] button.
The Options screen appears.
fig.d-Sys-Option-1.eps
3. Use the SEL [ ] [ ] buttons to select the
parameter that you want to edit.
4. Use the [-/+] dial to edit the value.
5. Press the [OK] button to return to the “MENU”
screen.
HH Pedal Sens
-5–+5
Adjusts the sensitivity of the “foot close” or “foot splash” sound.
Positive (+) values will produce a louder sound even when you press
the pedal lightly.
Xstick Adjust
-9–+9
Specifies the striking force at which the cross stick and open rim shot
sounds are switched.
Positive (+) values will play the cross stick sound even for stronger
strikes.
Advanced Edit
Here you can adjust the pad parameters in greater detail.
Refer to p. 40.
Specifying How the CR2 Trigger Cable will be Used
Screen Parameter/value Explanation
Crash 2 Usage
RIDE BELL:
The CR2 trigger cable will be used for RIDE BELL.
CRASH 2:
The CR2 trigger cable will be used for CRASH2.
Other Settings (OPTIONS)
Screen Parameter/Value Explanation
TD-4_e.book 35 ページ ２０１２年９月１０日 月曜日 午後１時４３分