Roland V-Combo VR-760 - Loading a File from Memory Card into the VR-760 (Load File); Renaming a File Saved to the Memory Card (Rename File)

59
Using the Advanced Functions
Advanced Functions
■ Loading a File from Memory Card into the
VR-760 (Load File)
1. Hold down the [EDIT] button, and press the
REGISTRATION [7] (UTILITY) button.
The Edit’s “UTILITY” screen is displayed.
2. Press CURSOR [ ] button to display the following screen.
fig.05-20(LoadFile)
3. Press the [ENTER] button.
A screen like the one shown below appears.
fig.05-21(SelectLoadFile)
4. Press CURSOR [ ][ ] button to select file.
5. Press the [ENTER] button to load settings.
After the loading is finished, a message indicating that it is completed
appears in the display, and the basic screen will appear.
■ Renaming a File Saved to the Memory Card
(Rename File)
This function rename file saved to the memory card.
1. Hold down the [EDIT] button, and press the
REGISTRATION [7] (UTILITY) button.
The Edit’s “UTILITY” screen is displayed.
2. Press CURSOR [ ] button to display the following screen.
fig.06-09(RenameFile)
3. Press the [ENTER] button.
A screen like the one shown below appears.
fig.06-10(SelectRenFile)
4. Press the CURSOR [ ][ ] button to select file.