Roland V-Combo VR-760 - Deleting a File Saved to the Memory Card (Delete File)

60
Using the Advanced Functions
5. Press the [ENTER] button.
A screen like the one shown below appears.
fig.06-11(NewName)
The cursor appears at the file name to the lower left of the display.
6. Rename file.
Move the cursor by using the CURSOR [ ][ ] buttons to the location
where you wish to input a character.
Input a character with the CURSOR [INC] [DEC] buttons.
When the [ ] button is pressed, a single-character “A” is inserted;
pressing the [ ] button deletes one character.
You can use up to 8 characters in naming files.
If you cancel file rename function, press the [EXIT] button to return to step 2.
7. Press the [ENTER] button.
The complete message is displayed and return to the basic screen.
■ Deleting a File Saved to the Memory Card
(Delete File)
1. Hold down the [EDIT] button, and press the
REGISTRATION [7] (UTILITY) button.
The Edit’s “UTILITY” screen is displayed.
2. Press CURSOR [ ] button to display the following screen.
fig.06-12(DeleteFile)
3. Press the [ENTER] button.
A screen like the one shown below appears.
fig.06-13(SelectDeleteFile)
4. Press the CURSOR [ ][ ] buttons to select file.
If you cancel delete file function, press the [EXIT] button to return to step 2.
5. Press the [ENTER] button to delete file.
The selected file is deleted.
A message indicating that it is completed appears in the display, and the
basic screen returns to the display.