Roland V-Drums TD-20 - Loading and Deleting Patterns from Memory Card

68
Chapter 7. Sequencer (Recording/Editing)
Loading a Pattern from a Memory
Card [F2 (LOAD)]
Patterns saved on a memory card can be loaded into the TD-
20.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
3. Press [F5 (CARD)].
The CompactFlash indicator light, and the “PATTERN
CARD” screen appears.
4. Press [F2 (LOAD)].
The “PATTERN LOAD” screen appears.
fig.07-PtnLoad1_70
5. Press [CURSOR (up)], and then use [+/-] or
[VALUE] to select the backup pattern you want
to load.
6. Press [CURSOR (down)], and then use [+/-] or
[VALUE] to select the user pattern to which the
backup pattern will be copied.
7. Press [F5 (LOAD)].
The confirmation screen appears.
fig.07-PtnLoad2_70
* To cancel, press [F1 (CANCEL)].
8. Press [F5 (EXECUTE)] to load the pattern.
Deleting a Pattern from a Memory
Card [F3 (DELETE)]
You can delete the unneeded pattern from a memory card.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
3. Press [F5 (CARD)].
The CompactFlash indicator light, and the “PATTERN
CARD” screen appears.
4. Press [F3 (DELETE)].
The “PATTERN DELETE” screen appears.
fig.07-PtnDel1_70
5. Use [+/-] or [VALUE] to select the unneeded
backup pattern.
6. Press [F5 (DELETE)].
The confirmation screen appears.
fig.07-PtnDel2_70
* To cancel, press [F1 (CANCEL)].
7. Press [F5 (EXECUTE)] to delete the backup
pattern.
TD-20_Ref_e.book 68 ページ ２００４年３月５日 金曜日 午後７時３分