10 ©2001 Roland Corporation US VS-2480 Tip Sheet
Controlling What’s On the Info Display
As you navigate the onboard LCD display of the VS-2480, the Info Display
automatically switches between various screens. You can also manually switch to a few
key screens, and you can lock the display so that it doesn’t change as you move from
screen to screen on the VS-2480.
Selecting Info Displays Manually
You can access several key screens from the VS-2480’s Home screen.
1. Press HOME/DISPLAY.
2. Press PAGE until “ID PL” appears above the F1 button.
3. You can press F1 through F5 to view the following screens:
•
ID PL (Info Display Playlist screen)
—shows the track playlist in the lower area on
the display.
•
ID IN (Info Display Input Channels)
—shows all 24 input channels in the lower
area on the display.
•
ID TR (Info Display Track Channels)—
shows all 24 track channels in the lower
area on the display.
•
ID Mlt (Info Display Multiple Parameters)
—shows a detailed view of the currently
selected group of 16 channel strips (Page 24).
•
ID ChV (Info Display Channel View)—
shows the CH EDIT parameters for the
currently selected input, track or FX return channel.
When the ID PL, ID IN or ID TR screens are in view, the Meters area is visible. You can
change what’s shown on the left side of the Meters Area—the right side always shows
the MONITOR and MASTER output levels:
1. Press HOME/DISPLAY.
2. Press PAGE until INPUT appears above F1.
3. Press:
•
INPUT—
to meter the VS-2480’s analog and digital input jacks and connectors.
•
IN Mix—
to meter input channel levels.
•
TR Mix—
to meter track channel levels.
•
AUXDIR—
to meter the AUX and DIR bus levels.
•
OUTPUT
—to meter the VS-2480’s output levels.
Locking the Info Display
You can lock the currently displayed Info Display screen so that it stays in view as you
move from screen to screen on the VS-2480.
1. Press HOME/DISPLAY.
2. Press PAGE until “IDHold” appears above the F6 button.
3. Press F6 (IDHold).
4. To unlock the display, repeat Steps 1-3.
To Next Page
Loading...
