VS-2480 Tip Sheet ©2001 Roland Corporation US 23
TRACK EDIT Shortcut Buttons
The TRACK EDIT buttons beneath the display provide a quick way to execute region
and phrase edits you’ve already set up.
The labels above the buttons show the available phrase operations when the
PHRASE•REGION•AUTOMIX button is lit green. The labels below the buttons show
the available region operations when PHRASE•REGION•AUTOMIX is lit red.
You can prepare for one of these operations by entering IN, OUT, FROM and/or TO
points or from the screens found in the TRACK Menu. (To view the TRACK Menu,
press the TRACK button.) Once your settings are the way you want them, you can press
the appropriate TRACK EDIT button to execute the desired command.
To Use a TRACK EDIT Shortcut Button
1. Press PHRASE•REGION•AUTOMIX repeatedly until it’s lit:
• red—if you want to edit by regions
• green—if you want to edit using phrases
2. If you’ve set up the required edit points, and the desired TRACK EDIT indicator
doesn’t light, press ENTER/YES.
3. Press the desired TRACK EDIT button.
4. Press ENTER/YES.
5. When the VS-2480 asks if you’re sure you want to proceed—and the displayed
settings are correct—press ENTER/YES. If you want to cancel, press EXIT/NO.
Resetting Mixer Parameters
You can quickly reset all mixer parameters to their default values. To do this:
1. Press UTILITY.
2. Press PAGE until “PrmIni” appears above F6.
3. Press F6 (PrmIni).
4. Turn the TIME/VALUE dial to select MIXER.
5. Press F5 (OK)—a confirmation screen appears.
6. If you’re sure you want to proceed, press ENTER/YES. To cancel the operation,
press EXIT/NO.
If the required edit points for a region or phrase operation have not yet been set up, the
operation’s shortcut button will not be lit.
TRACK EDIT
COPY MOVE INSERT CUT ERASE COMP / EXP.
IMPORT
TO
OUT
IN
FROM
COPY MOVE TRIM IN TRIM OUT DELETE SPLIT NEW
REGION
PHRASE
AUTOMIX
GRADATION
Region
operations
Phrase
operations
To Next Page
Loading...
